Our popular electric ski edge grinder ES 2000PLUS in the SC30 Set Advanced with Skispanner SC30 and a selection of grinding belts. For even more professional edge tuning of your skis and snowboards. With the electric ski edge grinder ES 2000PLUS, you achieve consistently high-quality grinding results with absolutely sharp edges and get the maximum out of your ski tuning for skis and snowboards.
Grind ski edges yourself like the pros - with the best electric ski edge grinder ES 2000PLUS from raze-cat - professional ski tuning.
Contents of the SC30 Set Advanced
- 1 x ES 2000PLUS electric ski edge grinder for grinding the ski and snowboard edge
- 1 x Skispanner SC30 for clamping your skis
- 1 x sanding belt sample set – our entire sanding belt range to try out (7 pieces)
- 3 x standard sanding belt | allround blue | grit 120
- 2 x standard sanding belt | medium red | grit 240
- 1 x pack of standard sanding belts (10 pcs.) | allround blue | grit 120 – (FREE)
- 1 x angle gauge to determine your edge angle
- 1 x operating instructions
The advantages
- Time-saving – perfect grinding of ski and snowboard edges in a few minutes
- Precise - the repeat accuracy of the grinding process is almost 100 %
- Efficient - mechanical removal of the sidewall material - preparation with the sidewall plane is not necessarily required
- Edge angle - continuously adjustable from 86°-90° - see our blog post!
- Low operating costs - one sanding belt is enough for several pairs of skis / boards
- Mobile - compact, portable and usable everywhere with mains power 230V/ 50Hz
- Practical - suitable for left- and right-handers
- Tight radii - sanding of the Magne-Traction edge ("wavy" edge) possible
- Quality - all parts made from rust-free precision metal parts - Made in Germany
Technical details
- Rotations: 11,000 rpm
- Power: 600 watts / Voltage 230 volts 50 Hz
- Weight: approx. 3000 g
- Cable length: 400 cm (with cable clip)
Frequently asked questions:
-
How many skis can I sand before I have to change the belt?
You can easily sand about 3-4 pairs of skis/boards with one belt. You shouldn't use a belt longer than that, as the sanding quality naturally decreases from time to time.
- Do I have to remove the sidewall before sanding?
This is not a strictly necessary step but is recommended to reduce dust formation. A plus: The sanding belts last a bit longer as a result.
-
Do I not remove too much edge when sanding with the machine?
No, don't worry. The material removal per sanding pass is in the hundredth of a millimeter range, so you don't have to fear removing too much from your edges.
-
Is it sufficient for "normal use" (sporty riding style, no racing ambitions) to sand the skis with the 120 and 240 grit?
Yes, absolutely! With the combination of these two sanding belts, you are well equipped.
Sustainably produced | Made in Germany
Our professional sets are the optimal foundation to start your ski service immediately. Not sure which sanding belt is right for you? An overview of all sanding belts and their application areas can be found here.
Our popular electric ski edge grinder ES 2000PLUS in the SC30 Set Advanced with Skispanner SC30 and a selection of grinding belts. For even more professional edge tuning of your skis and snowboards. With the electric ski edge grinder ES 2000PLUS, you achieve consistently high-quality grinding results with absolutely sharp edges and get the maximum out of your ski tuning for skis and snowboards.
Grind ski edges yourself like the pros - with the best electric ski edge grinder ES 2000PLUS from raze-cat - professional ski tuning.
Contents of the SC30 Set Advanced
- 1 x ES 2000PLUS electric ski edge grinder for grinding the ski and snowboard edge
- 1 x Skispanner SC30 for clamping your skis
- 1 x sanding belt sample set – our entire sanding belt range to try out (7 pieces)
- 3 x standard sanding belt | allround blue | grit 120
- 2 x standard sanding belt | medium red | grit 240
- 1 x pack of standard sanding belts (10 pcs.) | allround blue | grit 120 – (FREE)
- 1 x angle gauge to determine your edge angle
- 1 x operating instructions
The advantages
- Time-saving – perfect grinding of ski and snowboard edges in a few minutes
- Precise - the repeat accuracy of the grinding process is almost 100 %
- Efficient - mechanical removal of the sidewall material - preparation with the sidewall plane is not necessarily required
- Edge angle - continuously adjustable from 86°-90° - see our blog post!
- Low operating costs - one sanding belt is enough for several pairs of skis / boards
- Mobile - compact, portable and usable everywhere with mains power 230V/ 50Hz
- Practical - suitable for left- and right-handers
- Tight radii - sanding of the Magne-Traction edge ("wavy" edge) possible
- Quality - all parts made from rust-free precision metal parts - Made in Germany
Technical details
- Rotations: 11,000 rpm
- Power: 600 watts / Voltage 230 volts 50 Hz
- Weight: approx. 3000 g
- Cable length: 400 cm (with cable clip)
Frequently asked questions:
-
How many skis can I sand before I have to change the belt?
You can easily sand about 3-4 pairs of skis/boards with one belt. You shouldn't use a belt longer than that, as the sanding quality naturally decreases from time to time.
- Do I have to remove the sidewall before sanding?
This is not a strictly necessary step but is recommended to reduce dust formation. A plus: The sanding belts last a bit longer as a result.
-
Do I not remove too much edge when sanding with the machine?
No, don't worry. The material removal per sanding pass is in the hundredth of a millimeter range, so you don't have to fear removing too much from your edges.
-
Is it sufficient for "normal use" (sporty riding style, no racing ambitions) to sand the skis with the 120 and 240 grit?
Yes, absolutely! With the combination of these two sanding belts, you are well equipped.
Sustainably produced | Made in Germany
Our professional sets are the optimal foundation to start your ski service immediately. Not sure which sanding belt is right for you? An overview of all sanding belts and their application areas can be found here.