ES 2000PLUS | The right care for a permanently high-performance machine
How to properly care for your ES 2000PLUS ski edge grinder – for a long and powerful service life
Anyone who works extensively with the ES 2000PLUS from raze-cat knows: This ski edge grinding machine delivers top results – and does so consistently when properly maintained. Every grinding session produces grinding dust that settles in and around the machine. If this dust is not removed regularly, it can accumulate in the electronics and, in the worst case, cause a short circuit.
To ensure that your ES 2000PLUS ski edge grinder (+ previous models) always runs reliably, you should take a few minutes for regular cleaning.
🧽 How to properly clean your ES 2000PLUS
After each use, simply brush the machine thoroughly with a hand brush or paintbrush. Make sure to remove all dust deposits – especially around ventilation slots and moving parts. Unplug the machine before cleaning!
⚠️ Important: Do not use compressed air!
Although it may seem tempting to simply “blow away” the dust, this can push fine dust further into the inside of the machine – exactly where you do not want it.
🧲 Less dust inside the machine with our new magnetic strip
To make cleaning even easier, you can now equip the ES 2000PLUS with our innovative magnetic strip.
It catches up to approximately 70% of the grinding dust and securely holds it before it enters the machine.
Cleaning is incredibly easy:
-
Remove the magnetic strip
-
Wipe it with a dry cloth
-
Put it back in – done!
This keeps the electronics optimally protected and reduces the risk of dust accumulating inside to a minimum.
🔧 Tip: Remove the sidewall before grinding
One additional step to reduce dust generation is to remove the sidewalls from your ski before grinding. This removes less plastic during grinding, resulting in less dust. For this step, we recommend the sidewall planer.
This is not strictly necessary, but it is recommended if you want to work as cleanly and with as little dust as possible.
💡 Conclusion
With proper care, you will not only extend the service life of your ES 2000PLUS, but also ensure that it delivers its full performance whenever you need it.
Regular wiping instead of blowing out the dust, combined with the clever magnetic strip, makes maintenance especially easy – for clean work and a consistently powerful, long-lasting machine.
